RadioSecure SLJ cable system

Description

The RadioSecure™ SLJ e-seal system leverages the ability of the SLM to detect when its cable is removed or cut.

This allows long cables to be used to seal tautliners or flatbed trailers. Cables are threaded through buckles to reduce the number of seals required to secure tarpauling curtains. To make longer lengths less cumbersome, SLJ junction boxes can be employed as many times as required along the length of the truck, dividing a long run into multiple shorter cables

If any section of the cable is disconnected or cut, the SLM will send an unseal event to the servers for logging and immediate alert for attention.

Applications

  • Tautliners/Side curtain trucks
  • Flatbed trailers

Key Features

  • Breaking load of 645kgf
  • Cable diameter of 3.5mm
  • May be used with a reusable 70mm H-Bolt to accept a plastic pull-tight seal or cable seal, or for additional security a bolt seal may be used.

Specifications

  • Pull strength of 660kg
  • Tensile strength of 1,000kg
  • Cut strength of 800kg
  dimensions vibration & shock temperature tolerance humidity tolerance
SLJ junction box 95mm x 68mm x 40mm MIL-STD-810-F -20°C to +70°C 95% non condensing
SLM header (cable head) 12mm diameter      
SLM locking end (cable head) 3.5mm diameter      
SLJ header (cable head) 8mm diameter      

Images

By using a loop connected with SLJ junction boxes, the SLM is able to monitor the status of the 3.5mm diameter cable to detect when the cable is disconnected or cut. This allows multiple cables of any length to be used to secure many locking apertures such as tautliner buckles with fewer electronic seals.
By using a loop connected with SLJ junction boxes, the SLM is able to monitor the status of the 3.5mm diameter cable to detect when the cable is disconnected or cut. This allows multiple cables of any length to be used to secure many locking apertures such as tautliner buckles with fewer electronic seals.
The SLJs complete the electrical loop needed by the SLM to detect breaks in the cable so that it can report the unseal event immediately.
The SLJs complete the electrical loop needed by the SLM to detect breaks in the cable so that it can report the unseal event immediately.

Contact us

If you require brochures or samples please don't hesitate to contact us.

B-Sealed Pty. Ltd.
PO Box 8223
Baulkham Hills DC
NSW 2153 Australia

Unit 10a, 14-16 Stanton Road
Seven Hills
NSW 2147 Australia

Telephone:
(02) 9620 5988

Fax:
(02) 9620 5899

E-mail:
sales@bsealed.com.au